Murray Water Softener | Softener 801

◆ Serving Murray, Utah · Hard-water specialists

11.4 average.
4.7 to 27.1 underneath it.

Murray publishes an average of 11.4 grains per gallon — 194 mg/L — across 19 deep wells and eight springs. The useful detail is in the range behind that average: individual sources run from 4.7 all the way to 27.1 grains. Your reading depends on which of those is feeding your line.

11.4
grains / gal, city average
$0
on-site hardness test
Lifetime
workmanship warranty
Free in-home test · Murray
Very Hard
Murray, Utah water
  • We measure your real grains-per-gallon on site
  • Right-sized system tuned for Murray water
  • Licensed install & lifetime workmanship warranty

What Murray actually publishes about its water

Taken from the water utility's own reporting — not from a competitor's service-area page, and not estimated.

  • Published hardness11.4 average (194 mg/L); range 4.7-27.1 across sources
  • Where the water comes from19 deep wells and 8 springs
  • Who published itcity
  • Source documentwww.murray.utah.gov · 2025
  • Hardness scaleThe USGS classifies water above 180 mg/L as calcium carbonate (about 10.5 grains per gallon) as very hard, 121 to 180 mg/L as hard, and 61 to 120 mg/L as moderately hard. USGS

We publish the utility's own figures and link them so you can check us. Your tap is still what counts — hardness moves with the source and the season — so we measure before we size anything.

Water heatersScale cuts life in half
Dishes & glassCloudy, spotted, etched
LaundryStiff, dingy, faded
Pipes & fixturesClogged, corroded
What we install in Murray

Right-sized softening for Murray

We measure your actual Murray hardness and household use, then install a system tuned for Utah water — no guesswork, no upsell.

01

Metered Softener

Demand-initiated regeneration — it only cycles when you’ve actually used the capacity. Maximum salt and water efficiency for your Murray home.

See metered systems →
02

Utah-Tough Resin

High-capacity, fouling-resistant resin built to take on Murray’s mineral-heavy, sediment-laden water for years.

Why resin matters →
03

Pro Installation

Licensed, insured, code-compliant install with a bypass loop — backed by a lifetime workmanship warranty.

How install works →
Why Murray needs it

The average hides the spread

Murray's 11.4 grain average comes from 19 deep wells and 8 springs whose individual readings run from 4.7 to 27.1. Two Murray homes on different sources are not getting the same water, which is why the average is a starting point rather than an answer.

11.4
grains / gal, city average19 deep wells and 8 springs
Very Hard
On the USGS scaleAbove 180 mg/L as calcium carbonate, about 10.5 grains per gallon, is very hard.
$0
For your on-site hardness testWe come to your Murray home and measure it. No obligation.
11.4
grains / gal, city average
Very Hard
on the USGS hardness scale
$0
for your on-site Murray test
$0
for your on-site Murray test
Free · no obligation · ~30 min

End the hard-water war in Murray.

We come to your Murray home, test your water, and size the right softener. Then we install it right — once.

Proudly serving Murray and the Wasatch Front — Salt Lake City, Sandy, Draper, Lehi and beyond.

Powered byTHNK