Eleven city sources,
plus the district. No figure.
Washington runs eleven city sources plus surface water from Washington County Water Conservancy District, and publishes no hardness figure. St. George next door publishes 13 to 24 grains per gallon as a recommended softener setting, and it would be easy to reuse that here — but it describes a different blend. With eleven sources in play, your address is what decides the number.
- We measure your real grains-per-gallon on site
- Right-sized system tuned for Washington water
- Licensed install & lifetime workmanship warranty
What Washington actually publishes about its water
Taken from the water utility's own reporting — not from a competitor's service-area page, and not estimated.
- Published hardnessNo hardness figure published
- Where the water comes from11 city sources plus Washington County WCD surface water
- Who published itnot published
- Source documentwashingtoncity.org · 2025
- Hardness scaleThe USGS classifies water above 180 mg/L as calcium carbonate (about 10.5 grains per gallon) as very hard, 121 to 180 mg/L as hard, and 61 to 120 mg/L as moderately hard. USGS
We publish the utility's own figures and link them so you can check us. Your tap is still what counts — hardness moves with the source and the season — so we measure before we size anything.
Right-sized softening for Washington
We measure your actual Washington hardness and household use, then install a system tuned for Utah water — no guesswork, no upsell.
Metered Softener
Demand-initiated regeneration — it only cycles when you’ve actually used the capacity. Maximum salt and water efficiency for your Washington home.
See metered systems →Utah-Tough Resin
High-capacity, fouling-resistant resin built to take on Washington’s mineral-heavy, sediment-laden water for years.
Why resin matters →Pro Installation
Licensed, insured, code-compliant install with a bypass loop — backed by a lifetime workmanship warranty.
How install works →A big mixed system in Washington County
Washington blends eleven city sources with Washington County Water Conservancy District surface water and publishes no hardness. Neighboring St. George publishes 13 to 24 grains as a softener setting range, but that is guidance for St. George's blend, not a Washington measurement.
End the hard-water war in Washington.
We come to your Washington home, test your water, and size the right softener. Then we install it right — once.
Proudly serving Washington and the Wasatch Front — Salt Lake City, Sandy, Draper, Lehi and beyond.
